Warranty Repair Center for: C.F. Martin, Taylor, Fender
Acoustic Guitar Pickups byL.R. Baggs
LR Baggs iBeam Acoustic Guitar Pickup
The user-installable iBeam reproduces the natural tone of an acoustic guitar while maintaining perfect string balance and providing full dynamic range. Included with each iBeam is an installation jig that allows you to install the pickup in minutes and get the ideal placement for the transducer inside the guitar.
LR Baggs iBeam Active Acoustic Guitar Pickup System
The LR Baggs iBEAM Active Acoustic Guitar Pickup System combines an all-discrete, Class A FET preamp built on a stereo Strapjack and pre-tuned to deliver plug-and-play LR Baggs performance. The preamp also features a second active input, so you can easily run a second pickup to complement the LR Baggs iBeam.
LR Baggs LB6 Acoustic Guitar Pickup
Unitary saddle pickup for acoustic guitar. High output, great sensitivity and presence. Reproduces the natural sound of your acoustic. Resistant to feedback. May be plugged directly into most guitar amps or PA. 100% shielded, super quiet.
LR Baggs Ribbon Transducer .090
This innovative and reliable undersaddle pickup is less than 1/32" thick and contains a film sensor laminated between layers of Kapton and then laser-trimmed to its final form.The key feature that separates the RT from other pickups is that its sensor is responsive to vibration but not to pressure.
LR Baggs M1 Soundhole Pickup
New TriAxial Dynamic Technology allows the LR Baggs M1 Soundhole Pickup to respond to the guitar's string and body vibrations, redefining what is possible from a soundhole pickup. The LR Baggs M-1 is a humbucking pickup with a twist. In a common stacked humbucker, the second, lower coil cancels hum, but doesn't contribute anything positive to the sound. In fact, it can muddy the sound of the main coil. The M1 unlocks the second coil.
LR Baggs Dual Source System .090
The Dual Source Pickup System is a miniature onboard microphone/pickup mixing system that features all discrete Class A circuitry. The DS seamlessly combines a high-tech ribbon transducer with a high-quality FET condenser capsule for an affordable, simple-to-use one cord mix. A soundhole-mounted controller provides fingertip control of volume and mic levels. If you insist on having the presence and air that only a mic can add but do not want to haul around a rack full of gear or cut your guitar to install knobs, check out the DS.
Looking for an Acoustic Guitar AMP?
All Rights Reserved-All images and text are copyrighted and may not be used or republished without written permission. Copyright© 2000-2008 Fret Not Guitar Repair Legal Notices